POSX XR510 DRIVERS FOR MAC DOWNLOAD

Turn off power switch 1. Connecting The Cables You can connect up the cables required for printing to the printer. Table Of Contents 1. This manual also for: Comments to this Manuals Your Name. Turn screw with drivers to a direction until paper is released from the cutter. For terms and conditions please go to:

Uploader: Arazilkree
Date Added: 13 February 2013
File Size: 15.62 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 11128
Price: Free* [*Free Regsitration Required]

Turn off power switch 1. Connecting The Cables You can connect up the posx xr510 required for printing to the printer.

Then, close the cover. Loading The Roll Paper Make sure the printer is turned off and the printer cover posx xr510 closed properly.

Do not use paper rolls that have the paper glued to posx xr510 core because the printer cannot detect the paper end correctly. Output Impossible to print of data receiving. Table Of Contents 1. It has DIP switches that posx xr510 you to change communication setting, such as handshaking and parity check, as well as print density.

POS-X XR Hi-speed Thermal Receipt Printer – by ITSCO Products

Loading the Roll Paper Notes: If any items are damaged posx xr510 missing, please contact ;osx dealer for assistance. Make sure the printer is turned off. If the top cover is still stuck, please follow the steps to release the papers from jamming.

Read Also:   WIRELESS PCI ADAPTER MN 730 DRIVERS

If Dip Switch is [ON] without any special option purpose. When connecting or disconnecting the power posx xr510 from the printer, be sure that the following cautions are observed. By pressing ‘print’ posx xr510 you will print only current page.

POS-X Xr510 POS Printer

They all posx xr510 to the connector panel on the back of the printer, which is shown below: Control panel and other functions 3. You can connect podx the cables required for printing to the printer.

The Self Test prints the printer settings and then prints posx xr510 following, Cuts the paper, and pauses. Page of 29 Go.

POS-X XR Receipt Printer – pcAmerica Support Center

Setting up the printer 2. Setting Up The Printer, Unpacking 2. Tear off the paper as posx xr510. The driver is capable of supplying a maximum current of 1. Page 29 POS-X, lnc. Run any software program that sends data to the printer.

To use the hex dump feature, follow these steps 1. Unpacking Your printer box should include these items. Dip Cr510 Setting XruXrupXrus. Page 18 Posx xr510 the top cover is still stuck, please follow the steps posx xr510 release the papers from jamming. Don’t have an account?

Page 23 8 Overall dimension Remove the screw from the DIP switch cover.

Read Also:   ACTIVCARD ZFG 9800 AC DRIVER FOR WINDOWS

Related 10 Posts

No votes yet.
Please wait...